The Top Signs That You Need To Call A Plumber ASAP

[The Plumbing Life Saver]

If you’re like me, your pipes are probably something you don’t think about. They just work, right? And if they don’t, well then it’s a problem for another day. But what if I told you that there are certain signs that indicate when it’s time to call for a Best Plumbers in Newcastle?

If we don’t catch these problems early on and get our plumbing systems checked out before they become serious issues, then things can get messy fast! So here are some signs you shouldn’t ignore:

No water pressure

If you have low water pressure, it means that the flow of water coming out of your faucets is weak and inconsistent. If you have high water pressure, it means that the flow is too strong and could cause damage to your pipes or plumbing system.

https://plumbinglifesaverplumbernewcastle.files.wordpress.com/2023/05/plumber.jpg?w=1500 1500w, https://plumbinglifesaverplumbernewcastle.files.wordpress.com/2023/... 150w, https://plumbinglifesaverplumbernewcastle.files.wordpress.com/2023/... 300w, https://plumbinglifesaverplumbernewcastle.files.wordpress.com/2023/... 768w, https://plumbinglifesaverplumbernewcastle.files.wordpress.com/2023/... 1024w" sizes="(max-width: 750px) 100vw, 750px">

If your water pressure changes drastically when switching between different faucets in your home (for example, one has great pressure while another doesn’t), this could be an indicator that there’s a problem somewhere in your system.

Water pressure is low

If you notice that the water pressure in your home is low, there are a few things to check before calling a plumber.

First, check the pressure gauge on your water heater. If it’s reading below 60 psi (pounds per square inch) then you may need to replace some parts and/or get them repaired by a professional plumber. Next, check each of your faucets individually and make sure they aren’t leaking any water while they’re not being used.

Also check both toilets in the house as well; if one or both have a slow trickle coming from them when flushed then this could mean there’s something wrong with either its flapper valve or ballcock assembly (the part that controls how much water flows into each flush). Finally, take note of any potential issues with showerheads–they can sometimes cause low pressure when left on for too long due to wear and tear over time!

Your toilet keeps running constantly

If your toilet is running constantly, there are a few things to check.

• The water level may be too high. If you have an older toilet with a ballcock valve, the float ball could be broken and needs to be replaced. You can also try adjusting the chain that attaches to the flapper (the part of your toilet that controls when water flows into or out of its tank) by turning it clockwise until it stops making noise while flushing–this will lower how much water fills up inside your tank after each flush.
• Another possibility is that your flapper valve has cracked or broken altogether; this will cause water not only to leak out continuously but also cause air bubbles in your pipes when someone uses another faucet nearby because there’s no way for them both go down at once! This can lead those pipes clogging over time if left unchecked – so call us now before things get worse!

Conclusion

If you’re experiencing any of these problems, it’s important to call a plumber in Maitland right away. If you don’t address them quickly, they can cause more damage and even lead to leaks in your home that could be costly or dangerous if not taken care of quickly enough.