The Smart Phone LCD Parts

[Nipa Sarker]

The Samsung is there which isn't any visible crack on the screen but the LED underneath is broken that's a reason there is no image and if we plug in the charger it charges fine and makes noises but obviously, nothing shows up. because of broken screen water to get into the phone, we'll have to remove back cover so let's begin the Samsung galaxy phone LCD parts work and fix this film, first of all, we'll remove SIM tray then heat up the backside of the phone be careful while using heat gun because back cover is plastic made and you don't want to melt it down once back cover is warmed up enough we'll use the thin aluminum card and breathe adhesive you can also use the plain card.

The Phone LCD Parts:

Instead and if you struggle at any point you can reheat your required area and it will be a lot easier now once the backover is removed now we have access to the screws so unscrew all of them. This pointed in a red circle using a screwdriver and Samsung galaxy phone LCD parts now we'll go ahead and remove the second cover which is covering the battery and other components including the mainboard charging port etc. and once that is removed will disconnect the battery first then the main flex which connects the total board to the motherboard then unscrew these two using the same screwdriver and release the thumbprint scanner now disconnect another side of the main.

[Phoebe Lou]

Some players told me that they bought poe exalted orb on this site. I tried to buy some with their recommendations and felt happy that I found a wonderful place to buy exalted orbs.