Welcome to
On Feet Nation
khari zaffar Online
Thomas Shaw Online
Posted by Mitul Hasan on February 15, 2025 at 12:01pm 0 Comments 0 Likes
Posted by Mido Ram on February 15, 2025 at 12:01pm 0 Comments 1 Like
انت عارف يا حبيبي قبل منك يا حبيبي فاتنى ايه انا فاتني دنيا عشقتها حياتي جيت لونتها بالفرحة دي. في حاجات بتتاجلنا واهو ده النصيب علشان في خير متشالنا.
Posted by Mitul Hasan on February 15, 2025 at 11:51am 0 Comments 0 Likes
Posted by Mitul Hasan on February 15, 2025 at 11:43am 0 Comments 0 Likes
Why Are Metal 3D Printers So Expensive? Metal 3D printers are so expensive because they are a relatively new technology that requires expert engineering and heat-resistant materials to produce. The filament and maintenance costs also contribute to the high costs of printing metal.
Prototype testing is the process of testing your prototype with real users to validate design decisions before development starts. The goal is to identify problems and areas of improvement early so you can make the necessary changes prior to development and build a product that meets users' needs and expectations.
Yes, it is possible to 3D print items from metal. There are several manufacturing processes which fall under the heading of metal additive manufacturing, but this article concentrates on those which use layers of metal powder to build up and form complex structures that may be difficult to create with other techniques.
In the United Kingdom, the Firearms Act 1968 bans the manufacturing of guns and gun parts without government approval. Hence, 3D printed weapons are de facto banned because the law bans all manufacturing, regardless of method.
3D printed steel is a material obtained by superimposing delicate layers of steel. 3D printed steel enables you to make parts for technical applications that sometimes perform better than those manufactured by traditional methods.
Stainless Steel 3D printing is produced by fusion or laser sintering. Two possible technologies exist for this material: DMLS and SLM. At Sculpteo, we use DMLS (Direct Metal Laser Sintering) technology, a laser sintering technique on an EOS M280 machine to print stainless steel.
The resulting thermal conductivity is between 120 and 180 W/m-K which is comparable to that of 6061– maybe a bit lower. However, you can 3D print in 6061 aluminum and there are a number of powder suppliers who sell it with different levels of quality.
The layer height should be that small to achieve the most detail but if your slicer won't allow it, use a smaller nozzle if you have one. The designer also suggests printing with a print speed of 50 mm/s. If you follow these printing tips, this ring should end up taking only about 15 minutes to print.
Material infoGold 3D printing is perfect for creating everyday wear, and timeless pieces too. Available in yellow, white, and rose, as well as 14K and 18K, Gold is one of the highest quality materials Shapeways offers.
Prototypes can be used to test a new idea, recruit investors or get customer feedback before launching to a wider market.
© 2025 Created by PH the vintage.
Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation