When the machine is shut down

[Hejing Wang]

If you are doctor recommends that buy an oxygen concentrator to get oxygen therapy, you may use a strong oxygen compressor to increase the amount of oxygen stored. Do you could have questions about how the oxygen compressor works? Below I am going to show you how the particular oxygen compressor works in our lives.



Point:


How the particular oxygen compressor works？

Breathable air compressor workflow

Summary



How oxygen compressor works？


That crankshaft drives the connecting rod, the connecting rod drives the piston, and the piston moves vertical. The piston movement changes the amount inside the cylinder. If your piston moves downward, this cylinder volume increases, the intake valve opens, the particular exhaust valve closes, the air is sucked in, as well as the intake process is completed; when the piston techniques upward, The cylinder amount is reduced, the store valve is opened, that intake valve is closed, and the compression process is completed. It is really a positive displacement compressor this changes the internal volume of the compression chamber by you or several reciprocating pistons.



O2 compressor workflow


The oxygen to become compressed takes several methods to compress successfully. After passing throughout the filter, the intake solenoid valve, and entering the first stage cylinder from the compressor, after first-stage compression, it is discharged towards the first-stage cooler for a / c, and then discharged on the second-stage cylinder for compression setting and cooling...until the fourth-stage hot water tank is cooled and cooled then passed through the check out. The valve is dispatched. The cylinder and cooler on the compressor are cooled by way of separate fan blower. The unloading solenoid valve is arranged around the final stage of the particular compressor. When the machine is shut down, the pipeline and the gas within the cylinder are emptied, that is certainly prepared for the upcoming light load start. If required, the vented gas may be connected to the take in line.



This process might be divided into four techniques of expansion, suction, data compresion, and exhaust.

1. Expansion: When the piston moves to the left, the volume with the cylinder increases, the force drops, and the residual gas originally remaining within the cylinder expands.

2. Suction: Should the pressure drops slightly not as much as the gas pressure while in the intake pipe, the gas within the intake pipe pushes the suction valve in the cylinder. As the piston moves to the left, gas continues to enter in the cylinder until the piston moves into the left end.

3. Compression setting: As the piston turns for the right, the volume belonging to the cylinder gradually shrinks, thus starting the method of compressing the gas. Since the suction valve incorporates a back-stop effect, the gas from the cylinder cannot be returned towards inlet pipe, and the gas pressure in the outlet pipe is higher than the gas pressure inside the cylinder, and the gas within the cylinder cannot escape with the exhaust valve to the outside the cylinder. The gas in the outlet pipe carries a back-stop effect as a result of discharge valve and cannot flow on the cylinder. Therefore, the number of gas in the hot water tank is kept constant, and only because the piston continues to go on to the right, the air volume inside cylinder is reduced, and also the pressure of the petrol is continuously increased.

FIVE. Discharge: As the piston moves towards the right and the pressure on the compressed gas rises slightly towards gas pressure in this outlet pipe, the gas inside the cylinder opens the spring of the exhaust valve into your outlet pipe and frequently discharges until the piston movements. Until the end in the right. Then, the piston starts moving to the left again, repeating your above action. The piston continuously reciprocates inside cylinder to allow the cylinder to recirculate and also exhaust the gas. Each reciprocation belonging to the piston becomes a functioning cycle, and the distance the fact that piston passes each time or once is known as the stroke.



Summary


Oxygen compressors may be used as an auxiliary medical device that will those who need breathable oxygen. Such a compressor can be used in daily life and put together with living equipment. Similarly, what you no longer know is that nitrogen compressors in addition to hydrogen compressorscan be used officially.
https://www.oxygen-compressors.com/Oxygen-Compressor-pl3626255.html...

201911ld