THE EASY TO USE CAVITYCOMFORT PUMP FOR FRESHLY MASHED ORGANIC SUSPENSIONS

[freeamfva]

THE EASY TO USE CAVITYCOMFORT PUMP FOR FRESHLY MASHED ORGANIC SUSPENSIONS



The CC series was developed for harsh applications in which long downtimes for service and maintenance work are not acceptable – such as pumping freshly mashed organic suspensions, i.e. highly viscous media loaded with large quantities of fibrous solid matter.To get more news about magnetic drive pumps accessories, you can visit brysonpump.com official website.

The QuickService design is one-of-a-kind. Vogelsang has managed to decisively improve the tried-and-tested concept of the progressive cavity pump: Compared to conventional progressive cavity pumps, service and maintenance work is significantly quicker and takes up less space, because the innovative QuickService design means there is no need to disassemble parts of the pipe. All essential parts, including the gasket, can be quickly and easily changed, so the pump is soon operational again. Even the mechanical seal in the trusted Quality Cartridge design is easy to replace in the CC series.

At the same time, attention was paid to creating a sturdy and fault-resistant design; features that are essential for biogas plants: The large free passage is ensured over the entire length, preventing clogging and blockages caused by coarse disruptive matter such as foil residue and wood. The sturdy design of the drive line, including the cardan shaft, makes the progressive cavity pumps in the CC series ideal for high dry matter content and media loaded with foreign matter. This means that the unique overall concept of the CC series ensures long service lives, short downtimes for service and maintenance, and low operating costs for your biogas plants.
If a gap arises between rotor and stator due to wear in operation, the capacity drops. Whereas with conventional progressing cavity pumps, this often means a sudden drastic fall of the pump performance and the replacement of the rotor and stator, the HiCone solves this with axial readjustment of the rotor. The conical shape ensures the gap is regulated, as a result of which the pump is back to its original condition and the pumping capacity returns to 100 percent. Instead of the costly and time-consuming changing of parts, there is a quick and easy adjustment – during ongoing operation.

Combined with Vogelsang’s integrated QuickService concept, this means significantly reduced life-cycle costs for the user and higher pump availability, since there are no elaborate service deployments. If replacement is nevertheless necessary, the rotor-stator unit is swung out and can then be renewed either as a unit or individually. A wear-resistant sleeve, which does not need to be unmounted to change parts, protects the sturdy cardan shaft.
Thanks to the clever adjustment system, rotor and stator can be optimally positioned to each other according to operating parameters like pressure, temperature and viscosity. This results in lower power consumption, which reduces the electricity requirement. Wear is also reduced at the same time.

In addition, the HiCone’s automatic start-up saves power. The positioning of the rotor and stator in relation to each other is in such a way, that there is only minimal clamping between them. This means that a smaller motor is needed to ramp up the pump than in conventional progressive cavity pumps, which reduces the power requirement when starting the pump to a minimum. This increases the energy efficiency and reduces the costs for power electronics. The result is lower electricity costs and reduced procurement expense for users. The start-up process is fully automatic without the need for additional control. The clamping between the rotor and stator can be adjusted during the entire service life at the touch of a button or at the click of a mouse from the control room.