Suggestions for maintenance of construction waste counterattack

[xuanxuan geng]

The construction waste counter-attack is mainly composed of construction waste crusher, rotor, hammer head, counter-attack liner and sieve plate. It can crush the material once, simplify the processing technology and reduce the total cost of the user in the operation. The market is very popular. In the process of counter-attacking construction waste, we need to carry out frequent maintenance and maintenance, so as to ensure that the equipment creates higher value for us. The following is the construction waste of the Shibang Industrial Technology Group. Some suggestions made, I hope to help the user's production.
1, before the operation
Check all bolts broken by construction waste to see if there is any looseness; check if there are any debris in the crushing chamber, if there is any debris, please remove it in time; check whether the belt of the transmission and motor is broken and the layer is Phenomenon; look at the junction box of the motor and its grounding device are not connected, to ensure that the protection of the transmission device is complete and intact; after all the above inspections, it is confirmed that all the components of the counter-attack are intact before starting the operation.
2, in the operation
If the construction waste crusher is suddenly stopped during the operation, the real reason for the shutdown is not checked, and the equipment cannot be forced to start; if the counter-break is in the process of operation, if there is an abnormal knock or vibration, stop. Work, check the cause of the above phenomenon, in the process of troubleshooting, to avoid starting, so as to avoid accidents.
3, after the homework
After the construction waste is broken, the debris in the crushing chamber is cleaned to reduce the wear on the equipment. After the operation, the lubricating oil is cleaned and the bearings are cleaned regularly to ensure the flexibility of the bearing. Sex, improve equipment efficiency and increase production.