Shark Cordless Keeps Turning Off: What You Need to Know

[Nadim Khan]

If you are a Shark cordless vacuum owner, you might have experienced the frustration of the device shutting down unexpectedly during cleaning. The issue of a shark cordless keeps turning off is not uncommon, and it can be caused by a range of factors. In this article, we will explore the common reasons behind this problem and provide solutions to help you get back to efficient and uninterrupted cleaning.

 

The Battery is Low or Defective

 

One of the most common reasons why a Shark cordless vacuum keeps turning off is a low or defective battery. When the battery is low, the device may turn off to conserve power. In this case, you will need to recharge the battery to continue using the vacuum. However, if the battery is defective, it may not hold a charge for long or may not charge at all. In such cases, you may need to replace the battery or contact Shark customer support for assistance.

 

The Filters are Clogged

 

Another reason why your Shark cordless vacuum keeps turning off is because of clogged filters. If the filters are dirty, the vacuum may overheat, causing it to shut down as a safety measure. To avoid this, you should regularly clean the filters, as per the manufacturer's instructions. If the filters are damaged or worn out, you should replace them to prevent further problems.

 

The Brush Roll is Jammed

 

If your Shark cordless vacuum has a brush roll, it may become jammed due to hair, dirt, or other debris. This can cause the vacuum to shut off or become difficult to maneuver. To solve this problem, you should turn off the vacuum and remove any debris from the brush roll. You may also need to clean the brush roll with a brush or scissors to remove any tangled hair or fibers.

 

The Vacuum is Overheating

 

If you are using the Shark cordless vacuum continuously for an extended period, it may overheat, causing it to shut down. This is a safety feature designed to prevent the device from damage or harm. If this happens, you should turn off the vacuum and let it cool down for a few minutes before using it again. To avoid this problem, you should avoid using the vacuum for long periods and take breaks in between cleaning sessions.

 

Conclusion

 

If your Shark cordless vacuum keeps turning off, there are several possible reasons behind the problem. By identifying the cause of the issue, you can take appropriate measures to resolve it and enjoy uninterrupted cleaning. Regular maintenance, including cleaning the filters and brush roll, can prevent many of the issues mentioned above. If the problem persists, you should contact Shark customer support for further assistance or take the vacuum to a repair shop. With proper care and maintenance, your Shark cordless vacuum should provide you with years of reliable service.