Sand Maker Equipment Maintenance and Safety Precautions

[xuanxuan geng]

Equipment maintenance and safe operation are the key to the normal operation of the equipment. Below we SBM will give you a detailed introduction to the daily maintenance of the sand machine equipment and safety points.
First, the sand making machine (sand blasting machine) equipment maintenance:
Check the wear of impeller and various wearing parts of the sand making machine regularly. After wear, replace them in time. The wear-resistant cutter head must be replaced at the same time to avoid unbalanced weight and cause equipment vibration. For the double motor drive sand making machine, the working current should be Equal, otherwise the current side should be tight
Second, safety precautions:
(1) When the sand making machine (sand blasting machine) is working, it is forbidden to open any part of the equipment, and the ban on each part shall be guaranteed to be reliable;
(2) After the impeller is damaged, the new impeller should be replaced in time, and the wearing parts of each part should be promptly replaced after being worn out;
(3) Each start should be carried out in strict accordance with the regulations, and there must be no numbness;
(4) When the equipment is working, there should be special person's guardianship, if any abnormality is detected and timely stop, the rest personnel shall be far away from the scene, and all maintenance shall be conducted after the shutdown;
(5) The rotor should be replaced. It should be replaced by the manufacturer or technician who is familiar with the machine.
http://www.demihidraulik.com/products/sand-making-machine.html