Quick Guide for Choosing the Best Toilet Flush Valve

[Marlyn Moor]

Whether you are installing a new toilet or you simply want to replace the current flush valve, you need to find the right toilet flush valve. With so many toilets flush valves in the market; you can easily be confused about which one to choose. Fortunately, we are going to discuss a few important points that you need to keep in mind when looking for the best toilet flush valve.

Know Your Type of Toilet

The first thing you need to consider is to know whether you have a one piece or two piece toilet. Check the size of the discharge diameter as there are only two models: 50mm and 76mm.

So the next step is determining the type of valve to install based on your type of toilet. If it is a one-piece toilet, the cup and the tank are integrated; therefore, the valves used are different when compared to the ones used by the two-piece toilet.

The installation of the toilet flush valve in a two-piece valve involves inserting the valve into the discharge orifice and tightening the nut underneath. In the case of a one-piece toilet, the flush valve comes with some additions that help in anchoring it to the tank. It’s very easy to install: place the valve into the discharge port and secure it with the provided screws until it is adjusted properly to the sanitary.
If you want to know if the discharge diameter of your toilet is 50mm or 76mm, you can consult your manufacturer so that you can know the specifications of your toilet model. For reinstallation, consider taking the valve you want to replace the hardware store.

Know Whether You Need a Traditional or Dual Discharge

A traditional flush valve has only one type of discharge, which basically means that they release the same amount of water with every flush. A dual flush valve has the water saving advantage as it has a system for medium discharge and complete discharge. In addition, they are compatible with different tank heights of the toilets because of its adjustable overflow tube.
If you want to buy a dual flush valve, you will be required to consider the position of the discharge button. Check to see whether the valve is located forward, side, or up to choose the right model.

Consider the Material Used

When looking for the best toilet flush valves, you also need to consider the material used to make the toilet flush valve because you don’t want to replace the flush valve regularly. The most common material used to make toilet flush valve is plastic. Although you may also find assemblies in brass that you can install. Many people prefer brass because it is water resistant and it doesn’t cause corrosion. It is not as hard as steel and doesn’t break easily.

Make sure that you keep in mind the points we have mentioned above when looking for the best toilet flush valves to buy. Most importantly, make sure that you get your toilet valve from a reliable seller.

[Daniel Mudee]

Using your references and this https://abouttoilets.com/american-standard-champion-4-review/ review, I was able to choose the toilet without any problems. I want to note that the information in the review is presented competently, simply and clearly. This toilet is especially good because it has an affordable price. So, if you have a limited budget, then this option will be one of the best for you. At the same time, the quality and guarantee from the manufacturer at a high level.