Progress of the Plumbing System

[Casen]

In Mesopotamia, and Egypt in the fields used a complicated strategy of construction of irrigation systems, will control the flow of water that formed the foundation for the development of the most important cultures that preceded the Roman era.

Every day we use water dozens of times, beginning with an unscheduled visit to the bathroom in the morning and before the evening brushing our teeth before bedtime.

Usually, it is always at our disposal, as soon as open the control device, always in the right amount of pressure and the temperature, what is required. When we use it, do not think, where it came from, or what plumbing tools were used to ensure that it arrived at us in.Green Planet Plumbing
suitable condition for consumption.

Water can come from the nearest stream, from the well in the garden, or from a reservoir to accumulate rainwater. Man in whatever circumstances he was not, creates an opportunity of plumbing, providing him entry of water required for daily needs. If public plumbing system is unable to provide sufficient water pressure or if it is not at all, you need to use the machine water rise, increasing the pressure to the appropriate level.

The machine of lifting water is primarily from the pump and control panel. Consumption of water users has been atuneven, and this would make the pump all the time, then off, then turn on. That pump is not out of order provides storage reservoir, which, nourished, helping to improve the plumbing.

The tanks can be installed above, on the quality of at least a couple of meters above the place where the nearest water using sanitary devices. The principle of operation of these reservoirs is equivalent to that of the Roman aqueducts, ie Water flows down the conduits, driven by its very own gravity. Such a construction takes place, for example, the part of the superior floors of the building, which could be positioned further accommodations.

In closer to our days time, began to apply different systems, based on pressurized tanks, known as "digesters".

These reservoirs are feasted by pumps of appropriate capacity, they may draw water from the source, from a well or city plumbing. Accumulation of water in the reservoir under pressure ensures its delivery to any plumbing device of the system. Typically, such tanks are installed in the appropriate spaces on the first floor level or even in the attic. Consumers receive their water from the storage reservoir and the pump starts to work only when the minimum pressure in the reservoir falls below the minimum requirement.

In fact, for correct operation of modern appliances minimum pressure should not be below bar, but should not exceed bar.

If the storage reservoir is large enough and the pump designed properly, with a small number of rounds per hour, then users will be provided with sufficient water and good business head.

As will be described below, for each level of electrical power pump recommended a certain maximum number of inclusions per hour, beyond which there is a risk of overheating and, consequently, the possibility of breakdowns, the elimination which would require replacement of the pump.