Printer with paper choking

[Jack prabha]

Even if the printer is the most modern and high-tech, it is very common for this to happen . You set up the pages and paper correctly.

Everything is ok to start printing. But, in the middle of the process, the printer hangs and the paper is stuck and all wrinkled inside.

Whoever goes through this, knows how much this unforeseen delays an entire schedule. This is usually one of the hardware problems that happen when you need to print that very important document.

Know more: What is SD WAN?

Even if you configure the printer correctly and update the drive regularly, it is always a good idea to check, if everything is right, before sending a printout.

Be aware of the type of paper that will be used , it can lock the printer easily. First of all, confirm that the paper is compatible.

If you select letter printing, but you are using an A4 sheet, the printer may jam. Also check the paper tray to see if the sheets are aligned.

If the process is interrupted, open the printer compartment carefully , according to the equipment manual.

Once this is done, confirm if there is any jammed paper and try to remove it. As long as there are no obstacles in the compartment, the printer will not operate correctly.