How to improve the output of the counter sand making machine?

[liu yoyo]

In order to improve the counter type sand making machine production first to understand the working principle of counter type sand making machine, and then can be further improved, the hammer crusher is mainly driven by the motor rotor, and the rotor on the hammer rotating speed, and then put into the material impact or shear, crushed material after the leakage of sieve plate, while adjusting the sieve screen bar gap sizes of particles we need. Based on the principle of making sand, we can take the following measures to improve the output of this machine.

First, it is better to make counterattack sand making machines. Only high quality materials can produce high efficiency crushers, and the production will increase during use. For example, the part of the rotor, it is in the core position of the rotor, which is composed of a hammer plate, end plate, hammer and so on, in order to make the hammer plate and the end plate and spindle three form, respectively at both ends of the main shaft with the clamp, thus increasing the stiffness, even crushed lump ore is not a problem or in the process of using a relatively large torque will not affect the normal production of high manganese steel hammer, the rotor should be selected containing chromium, which can make the hammer with resistance and wear resistance and impact resistance higher, hammer structure is also used in the whole back structure, so even if the encounter large ore cannot blow broken, too can to hammer disc, which can make the normal operation of the rotor, and when the hammer is used for a long time, and severe wear can be changed to the other side to continue to use, this will improve The output of the counter - type sand - making machine will not affect the normal construction period.

Second. Hardness and humidity of the material to be input. When the input materials more hard hammer crusher on shear more difficult, more investment into the wet material, the viscosity is bigger, these factors will affect the production quantity of crusher work, so the use of counter type sand making machine with too wet or too hard materials most good again for grinding, this will greatly enhance the yield of counter type sand making machine.

Finally, the daily maintenance of machinery and equipment. To regularly check the internal parts, installed in the use process such as plate, transfer from disk, a supporting rod, hammer, connecting mechanism and so on, because these parts in the process of using the most easy to wear or damage, not timely find out which will affect its efficiency, reducing low yield, may be a lot of crusher sand making machine users have luck, think a bit worn or damaged parts, as long as the whole machine can also turn up will use this situation, although the machine is still working, but the work efficiency has been greatly reduced. Therefore, in order to improve production efficiency, we must do a good job of equipment maintenance.