How To Fix HP Printer Failure 0x6100004a - (Full solution)

[Robert john]

When you encounter an HP Printer Failure 0x6100004a, there are several ways to fix it. HP printers are known to excel both at home and in the office. They have become household names for printers around the world. However, technical problems like error code 0x6100004a can still occur.

Error 0x6100004a occurs in most HP printer models. This problem is usually due to mechanical damage. A paper jam can occur in the printer, and pieces of paper prevent the print carriage from moving freely.

It is also possible that the HP printer is malfunctioning. Although there have been no problems for a long time, some printers have printing stoppages that result in error 0x6100004a. You should also check the vents on the cartridge. If these pins and vents are clogged, an error will occur.

What Causes HP Printer Error 0x6100004a?

• Firmware Failure: After prolonged use or an unexpected shutdown, a device-wide printing stoppage may occur, eventually triggering this particular error code. To resolve this error, you must reset the entire printing mechanism (which is equivalent to turning off the printer).
• Clogged holes and ink cartridge contacts: This printer error can also be caused by clogged cartridge contacts or vents. If this is the case, you should be able to solve the problem by cleaning all ink cartridge contacts and vents and then reinserting them one at a time to determine if a particular cartridge is causing the problem.
• Restrictions on shipping due to paper jams: A paper jam can also be the cause of error 0x6100004a. In some cases, paper jams can prevent the carriage from moving freely across the width of the printer. In this case, open the ink cartridge access door and remove any foreign objects that might be causing the jam.

Solutions To Resolve The Hp Printer Error 0X6100004A

If you encounter the error, then it can be fixed by following the guide. Simply follow the below-mentioned steps to eliminate the HP Printer Failure 0x6100004a.

Solution 1 – Default Settings

• #Step 1 – Firstly, if your printer isn’t on, then turn it on and return to “Home Screen” by clicking the “OK” button or “HIDE” button.
• #Step 2 – Now, locate the “Back” button on the left side of the corner.
• #Step 3 – Afterwards, you will receive a blank screen with a “support menu” at the top of the screen.
• #Step 4 – After clicking on the support menu, you will see a message, and at the bottom of the screen, there will be a big “X” along with right and left brackets.
• #Step 5 – Double click on the right bracket “>” and you will get “Reset Menu.”
• #Step 6 – Now, click on the “OK” button which is there with the right bracket.
• #Step 7 – Press on the right bracket and you will see “Partial Reset.” And, pressing it again will directly bring the “Semi-Full Reset” prompt.
• #Step 8 – After performing the semi-full reset, it will reset the printer’s settings to default and clear the paper-jam state.
• #Step 9 – Finally, the printer will turn it off automatically and you have to turn it on again. Now, try printing again.

Solution 2 – Fix The Paper Jam

In some cases, a paper jam can also be one of the reasons due to which the HP printer failure error 0X6100004A appears on the HP printer screen.

• #Step 1 – Firstly, look for the jammed paper in the document feeder or roller. By turning on the printer and removing the power cord.
• #Step 2 – Now, open the cartridge access door of the printer and check if there’s any piece of paper is stuck in the carriage.
• #Step 3 – If there’s any paper, and then immediately remove the paper from the carriage.
• #Step 4 – Afterwards, clean the paper feed roller to remove the dust and paper fiber. 
• #Step 5 – Lastly, reset the printer by reconnecting it to the power cord and try printing again.

Follow the steps to fix the Error instantly!

(Content Source)