How to fix Canon printer error code 6000

[Robert john]

The Canon printer error code 6000 is one of the most common errors that occur frequently. It appears when users try to print documents on the device. The paper jam problem is the main cause of this error. This post will briefly discuss one such Canon printer error. Just read this post carefully.

We have listed some effective and tested solutions to fix the problem. But first, you have to know the exact cause of this problem. So take a look around below and find the right reason.

The orange and green LEDs on your printer flash three times in succession and the LC display shows the error message 6000. This means that there is a service error on your device. Fix it as follows.

Here are Steps to fix Canon printer error code 6000:

Turn off your Canon PIXMA

Then disconnect the power cord from the device.

Open the top cover on the printer.

Make sure there is no orange tape or white styrofoam inside the printer. If so, remove it.

Make sure that there is no foreign object such as a paper clip inside the printer. If so, remove it.

Then close the top cover on the printer again.

Reconnect the power cord to your Canon PIXMA

Now switch the device on again.

After these steps, you should be able to use your Canon PIXMA again as normal. If the problem persists, check the Source blog.

Source: Canon printer error code 6000