How to Apply Polyaspartic to Concrete

[Andrew Paul]

Polyaspartic is a floor coating that has a tough, fast-drying, and durable surface. It is a hybrid material that resembles polyurethane. It can be applied on indoor and outdoor surfaces. Typically, the coating has a clear, glossy finish. Decorative chips can be added to the still-wet coating for a textured look.
how many polyurethane coats

While the cost of a polyaspartic floor may be higher than standard epoxies, the product provides many benefits. It is durable, fade-resistant, and offers high stain resistance. In addition, it is more flexible than epoxy. This makes it ideal for projects that require quick cure times. It is also resistant to UV exposure.

Before you install a polyaspartic coating, you will need to prepare the surface. This includes removing any paint, dirt, and debris. Additionally, you will need to create a moisture barrier. The coating does not adhere well to concrete, so you will need to seal the area to prevent moisture from getting through.

You will want to apply a coat of epoxy on the floor before you begin applying polyaspartic. This is essential for the polyaspartic to have a chance to bond to the concrete. If you skip this step, you could end up with air bubbles in your coating, which can lead to unevenness in the finish.

After you have prepared the surface, you will need to use a roller brush or a nap roller to spread the polyaspartic coating. It is important to spread the coat with enough pressure and avoid spreading it too thick. Using too much force can cause the coat to peel or chip away from the concrete. If you are not skilled at this type of work, it is best to hire a professional.

Once the polyaspartic coat is applied, you will have a floor that is abrasion-resistant, durable, and UV-resistant. You can add color to the coating by adding a few drops of acetone. For an even bolder look, you can add paint chips. These chips can be distributed throughout the still-wet coating for a unique, non-slip texture.

It is important to understand that while polyaspartic is durable, it is not as strong as traditional epoxies. You can use non-slip epoxies, but this will increase the overall cost of your project. You should always consult with a professional before beginning your project. The more you know, the better prepared you'll be.

You should also remember that the polyaspartic coating will not bond to concrete if there is a lot of moisture. If you are installing a polyaspartic floor on a garage, for example, you will need to take special steps to make sure the floor has adequate traction. You will need to sprinkle non-skid traction materials on the surface after the second coat. This will help keep the coating from wearing off.

Finally, you should know that a polyaspartic coating will last for years. This is because the sealer is made from a hybrid blend of aliphatic polyurea, ester, and other materials. This blend was created to ensure a fast drying time, and it is formulated for low VOC emissions.