FLANGED MILL DIE CAST WITH Screw Holes

[Andrew Paul]

When designing a mill die casting, consider the finish of the flange. This will determine the smoothness or roughness of the surface and the type of serrations. There are many options for serrations, and the requirements are different from standard to standard. Some of the common options are continuous serrated, concentric serrated, smooth, mill or rolled finish, or custom machining. You will also have a choice of protective coatings.
PF 230 mill/drill head

The Mill/Drill Head PF 230 is a tool that turns your Lathe PD 250/E into a machining center. This tool has an X-Y travel of longitudinal and cross-wise directions, and a 3-T slotted table. It is equipped with three collets of size 15/64", 5/16" and 25/64". This tool is shipped within seven to ten business days after you place your order.
PF 230 flange

The PF 230 is a versatile mill designed for face, longitudinal and taper turning as well as thread-cutting. It is designed for machining metal, plastic and aluminum. The mill features a cast iron machine bed, wide-legged prismatic guide, and a covered lead spindle.

The PF 230 Mill/Drill Head is designed to convert a Lathe PD 250/E into a machining center. It features four screw holes that enable it to be adapted to most milling applications. The PF 230 is manufactured with a two-year warranty.

The shaft is made of 6005-T5 Aluminum Alloy. The wall thickness of the shaft is indicated on the plans. The shaft has a continuous taper of about 0.14 inches per foot and twelve millimeters per meter. The arms are sized to fit the plans.

For More Click on https://fittingsplus.com/