Factors affecting crusher loss

[xuanxuan geng]

The use of the Crushing Equipment plays a big role in the production of miners. It has high production efficiency and wear resistance. It is a meaningful equipment for ore crushing. In order to make the equipment better, in addition to standard operation, To reduce its wear and tear, let's take a look at the factors that affect equipment loss:
1. The effect of cutter wear. When the filter used to grind the flake powder is of a suitable size, but the blade is worn, the problem caused by shredding is similar to the case of cutting a large sheet, the cut surface is wrinkled, and the edges are roughened and hooked to each other. If the bulk density of the scrap is small, the conveying performance is poor, which ultimately leads to low yield and affects the performance of the crusher.
2. The influence of the size of the filter mesh. The yield increases as the size of the screen pores increases, and the specific energy consumption of the mill decreases. In order to achieve high yields of die cut chips, a good pumping action should be formed to direct the melt through the screen holes. However, this may affect the size distribution of the flakes, which in turn affects the Quarry crusher. In addition, the large size of the sheet material makes transportation, storage, and storage bin discharge difficult. However, if the properties of the raw materials are known, better process conditions can be obtained. The flakes are large in size and low in yield, in part because of the small bulk density.
Through the above introduction, it is not difficult to see that the factors affecting the loss of the crusher are mainly related to the filter hole and the wear of the cutter. Therefore, in order to improve the production efficiency, the user can reduce the loss of the equipment from these two aspects, thereby improving the efficiency.